IMAX B8 CHARGER (SILVER)
Watt meter up to 100A
You can establish your power plant with a right propeller for the best current Watt meter can be operated with tachometer Automatic voltage/amp calibration. No need to calibrate the voltage of source. Additional power supply is not needed even the input power source is less than 4.5V.
Rotor blade tachometer
Precision tachometer up to 3000RPM. Rotating-drum type slit synchronize system. Up to 10 incidental RPM can be stored to the memory.
Solid-state temperature sensor by contacting the material being checked.
RX battery checker/discharger
You can check your RX battery with a certain current load accurately. NiCd 4.8/6.0/9.6V and Lithium 7.4V with 100 to 1000mAh current load When being checked, the present voltage and the residue of capacity are displayed NiCd batteries can be discharged to 0.9V/cell.
Back-light LCD screen
You can adjust the brightness of LCD display
Automatic power off and back-light off
To prevent from wasting the energy, the power will go off when there is no action for 10 minutes. The back-light will go off in 1 minutes if you do nothing with the unit.
Robust outer aluminum case
High-quality aluminum case is durable and very efficient to cool out the internal heat
* Operating voltage range:10.0~18.0 Volt
* Circuit power: max. 150W
* Charge current range: 0.1~7.0A
* Discharge current range: 0.1~5.0A
* Current drain for balancing Li-po: 300mAh / cell
* NiCd / NiMH battery cell count: 1~27 cells
* Lithium battery cell count: 1~8 Series
* Pb battery voltage:2 to 36V
* Dimensions: 170*110*40 mm
* Microprocessor controlled
* Delta-peak sensitivity
* Individual cell balancing
* Li-ion, LiPo and LiFe capable
* Ni-Cd and NiMH capable
* Large range of charge currents
* Store function, allows safe storage current
* Time limit function
* Input voltage monitoring. (Protects car batteries at the field)
* Data storage (Store up to 5 packs in memory)
* Battery break in and cycling.
* PC analysis via USB cable (software & USB not included)